Results 1 to 4 of 4
  1. #1
    RC poster
    Join Date
    Nov 2018
    Posts
    3

    Possible Teton servo issue?

    Hi all. Very new to this community. Bought my son a Teton as an entry point, and as expected he crashed it the first time he drove it.

    It cracked the front suspension bar, that I replaced pretty easily. After that I noticed that the steering was off a little but that I was able to fix by trimming a little bit.

    Not sure if he crashed it again but came home from work and now the servo arm/bar seems to repeat and the wheels turn all the way to the right. Using the wheel on the controller I am not able to turn the wheels

    See video on YouTube
    .
    Any thoughts from more experienced drivers?

    Thanks.

  2. #2
    RC Racer GreenSpider25's Avatar
    Join Date
    Aug 2018
    Posts
    116
    Remove the steering servo and open it up. You most likely just stripped the gears. You can get new gears for 4 or 5 bucks.
    WHEN IN DOUBT, AIR IT OUT!!

  3. #3
    RC poster
    Join Date
    Nov 2018
    Posts
    3
    Quote Originally Posted by GreenSpider25 View Post
    Remove the steering servo and open it up. You most likely just stripped the gears. You can get new gears for 4 or 5 bucks.


    Thanks, will give it a try over the next few days and report back.

  4. #4
    RC poster
    Join Date
    Nov 2018
    Posts
    3
    Bingo. I opened the servo and found stripped gears.
    Many thanks for your help Greenspider

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •