Results 1 to 4 of 4
  1. #1
    RC Enthusiast
    Join Date
    Dec 2009
    Location
    central new york
    Posts
    42

    transmission shifting servo replacement issues..

    So i had a dead 2065 servo, the one that controls the high/low speed. Bought a new one, installed it, and it either keeps pushing/chattering on the low side, or if i adjust a tooth or two on high side.. it is like the there is too much throw in the servo.. Any ideas?? ps, it is the original 1/10 summit. just started to play with them again...Thanks in advance..

  2. #2
    RC Qualifier
    Join Date
    Apr 2018
    Posts
    682
    You can try setting the endpoints for it so it doesn’t have such a long throw. I ended up using a servo from my mini erevo. Had to do some modding, but it has not given me any issues for a few years now.

  3. #3
    RC Enthusiast
    Join Date
    Dec 2009
    Location
    central new york
    Posts
    42
    how do you adjust the endpoints of an individual servo? i know you can do with the steering servo's but on a transmission servo??

  4. #4
    RC Enthusiast
    Join Date
    Dec 2009
    Location
    central new york
    Posts
    42
    according to this post, you can not set the end points of the front/rear lock and the hi/low transmission servo...

    https://forums.traxxas.com/showthrea...ing-end-points

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •