Results 1 to 4 of 4
  1. #1
    RC poster
    Join Date
    Mar 2019
    Posts
    2

    New Stampede vxl tsm binding problem

    Just came in directly from traxxas:

    https://traxxas.com/products/models/...de-4x4-vxl-tsm

    The problem is that the tqi receiver link button led remains a solid red when holding the "link" button down, it never blinks. I know it is supposed to flash green/red to pair but this is not happening. Defective receiver?

  2. #2
    Marshal Double G's Avatar
    Join Date
    May 2008
    Posts
    13,448
    It may be. Have you contacted Traxxas Customer Support?
    The Super Derecho

  3. #3
    RC Qualifier Rich2's Avatar
    Join Date
    Feb 2014
    Location
    Western New York
    Posts
    627
    Double post
    Last edited by Rich2; 05-28-2019 at 04:22 PM.

  4. #4
    RC Qualifier Rich2's Avatar
    Join Date
    Feb 2014
    Location
    Western New York
    Posts
    627
    Make sure you read these steps

    TRX receiver binding
    1. Press and hold the transmitter’s SET button
    as you switch transmitter on. The transmitter’s
    LED will flash red slowly. Release the SET button
    2. Press and hold the receiver’s LINK button as
    you switch on the speed control (by pressing the
    EZ-Set button)
    . Release the LINK button.
    3. When the transmitter and receiver’s LEDs turn
    solid green, the system is bound and ready for use.
    Confirm that the steering and throttle operate
    properly before driving your model.
    Last edited by Rich2; 05-28-2019 at 04:23 PM.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •