Wheels for the UDR ??

[cwmoss]

From everything I have seen, the front and rear wheels/tires are the same, or are they?? I am wanting to upgrade to beadlock wheels on my UDR and have found some being sold by RC4WD, but they list ones for the front and ones for the rear? They are made to be used with the Traxxas tires. Anyone know why there are front and rears??

[Dustin Bumps]

I would think they are same front and rear, since it has usable spares mounted in bed of truck?


Sent from my iPhone using Tapatalk

[cwmoss]

I called RC4wd and talked to a nice fellow. I asked him about the difference. He said that there had been a clearance problem, but couldn't tell me where. He said he didn't have a UDR there so he could try the two different wheels on the truck to see what the issue was. He said he couldn't think why you couldn't run them at all 4 corners. I went and looked at their new releases and the 0302 wheel was the first out and it has the smaller dimensions, and it is now listed for the front, and there is a 0291 wheel that is now listed and it has little larger dimension and is listed for the rear.

[Scoobarooo]

From everything I have seen, the front and rear wheels/tires are the same, or are they?? I am wanting to upgrade to beadlock wheels on my UDR and have found some being sold by RC4WD, but they list ones for the front and ones for the rear? They are made to be used with the Traxxas tires. Anyone know why there are front and rears??

I'd highly recommend going with Vitavon wheels. Highest quality you can get, no doubt and handle 6s very very well.

Sent from my S9+ using Tapatalk

[Dustin Bumps]

So, you can just buy 4 of the 0291 part number wheels and use for front and rear?


Sent from my iPhone using Tapatalk

[xOperator]

I'd highly recommend going with Vitavon wheels. Highest quality you can get, no doubt and handle 6s very very well.
Sent from my S9+ using Tapatalk

I've been thinking of getting those but never saw anyone make a post about them here.
Front and rear are the same?

I saw that RC4WD has wheels also now, they are sold in pairs of front and back, for abotu $30 cheaper/per pair compared to the Vitavons on Ebay

[Scoobarooo]

I've been thinking of getting those but never saw anyone make a post about them here.
Front and rear are the same?

I saw that RC4WD has wheels also now, they are sold in pairs of front and back, for abotu $30 cheaper/per pair compared to the Vitavons on Ebay

They are the same front and rear. RC4WD makes good parts, but I wouldn't even compare them to Vitavon in my opinion. Arthur has incredible customer service and makes absolutely incredible parts for the UDR. He's a really cool guy.

Sent from my S9+ using Tapatalk

[MAC FAB]

I'd highly recommend going with Vitavon wheels. Highest quality you can get, no doubt and handle 6s very very well.

Sent from my S9+ using Tapatalk

I see Grabbers, off the DB8?

[Scoobarooo]

I see Grabbers, off the DB8?

Yes, from a DB8.

Sent from my S9+ using Tapatalk

[MAC FAB]

Same o.d. as the BFGs that came with it? Those look goooooood!!

[Scoobarooo]

Same o.d. as the BFGs that came with it? Those look goooooood!!

Yes. Same exact size, just a **** of a lot softer. I wouldn't recommend any concrete with these.

Sent from my S9+ using Tapatalk

[cwmoss]

So, you can just buy 4 of the 0291 part number wheels and use for front and rear?


Sent from my iPhone using Tapatalk

That's what I was gonna do, if I go with them.

[cwmoss]

I'd highly recommend going with Vitavon wheels. Highest quality you can get, no doubt and handle 6s very very well.

Sent from my S9+ using Tapatalk

These look amazing on the truck.

[Scoobarooo]

These look amazing on the truck.

I know it! Arthur had a ton of colors as well.

Sent from my S9+ using Tapatalk

[Dustin Bumps]

Are those wheels aluminum or plastic?


Sent from my iPhone using Tapatalk

[Scoobarooo]

Are those wheels aluminum or plastic?


Sent from my iPhone using Tapatalk

CNC aluminum

Sent from my S9+ using Tapatalk

[Dustin Bumps]

Nice! Thanks


Sent from my iPhone using Tapatalk

[xOperator]

I know it! Arthur had a ton of colors as well.

Sent from my S9+ using Tapatalk

Where are the colors at? Are there different rings?
I only see the part numbers mentioned in posts above

[cwmoss]

Where are the colors at? Are there different rings?
I only see the part numbers mentioned in posts above

Do a search over on the "bay" and you can see the different colors.

[Scoobarooo]

Where are the colors at? Are there different rings?
I only see the part numbers mentioned in posts above

If you talk to Arthur on facebook, he will do more colors.

Sent from my S9+ using Tapatalk

[FlyingDutchman]

Yes, from a DB8.

Sent from my S9+ using Tapatalk

Will the DB8 rims fit on the UDR....

[MAC FAB]

Will the DB8 rims fit on the UDR....

They are 17mm hex, so no as is. I'm going to be using them on my current scratch build, not thrilled about that format, but they look closer to the VW wide 5 format I need.

[MAC FAB]

Look at this: https://www.ebay.com/itm/Team-Associ...5.c10#viTabs_0
Were on a UDR?????

[MAC FAB]

Ok, just got mine in the mail. Not sure what the UDR wheel offset is, but from the INSIDE FACE OF THE HEX, you have 1-1/2" measurement. Running Summit hexes/adapters, it will come back to about 1-1/8". I hope this helps those in question about these. Nice wheel/tire combo if you can make it work.