Results 1 to 5 of 5
  1. #1
    RC Enthusiast
    Join Date
    Mar 2010
    Location
    Graham, WA
    Posts
    22

    Does anyone know why my Revo isn't turning?

    https://imgur.com/gallery/imBS5pW

    I'm getting frustrated and have no idea why it's doing this.
    Revo 3.3 (#5309)
    I'm lovin' it! :)

  2. #2
    RC Qualifier USMC1984's Avatar
    Join Date
    Jul 2019
    Location
    Greeley, CO
    Posts
    325
    You're gonna need some pliers and a set of 30 weight ball bearings, now prep the Fetzer valve with 3 in 1 oil and some gauze pads. Oh, and you're gonna need about ten quarts of antifreeze, preferably Prestone...no, ...make it Quaker State. ~Irwin Fletcher

  3. #3
    RC Racer
    Join Date
    Dec 2014
    Location
    Adirondacks
    Posts
    232
    It looks like your Rx battery is weak, needs a charge or possible pivot balls caps are to tight. Also your steering channel is reversed from stock settings.

  4. #4
    RC Enthusiast
    Join Date
    Mar 2010
    Location
    Graham, WA
    Posts
    22
    I do need a new battery, same one from when I got the truck but it was on a full charge. I'll look at the pivot ball caps, thanks for the tip.

    And yea, haha I have no idea how that happened and thought it was a problem until I Googled it earlier. Thanks again!
    Last edited by TheREVOman; 08-04-2019 at 01:14 AM.
    Revo 3.3 (#5309)
    I'm lovin' it! :)

  5. #5
    Marshal Double G's Avatar
    Join Date
    May 2008
    Posts
    13,452
    Remove the servo horns from the servo and turn it by hand. If there is resistance figure where it is and eliminate it - as mentioned the pillow ball caps can be too tight.

    Buy a new rechargeable battery pack. May want to consider going to a single powerful servo so that you are not draining the batteries with two that may end up fighting each other.

    Pull the manual out and reverse the direction of the servos.
    The Super Derecho

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •