Results 1 to 10 of 10
  1. #1
    RC Qualifier
    Join Date
    Jul 2013
    Location
    Northern Norway
    Posts
    869

    Measurements on the TRX-4 Sport bumper light bar?

    Hi, guys and gals!

    I need a favour, please!
    I have an aftermarket front alu bumper with bull bar on my Defender, and I'm looking for a LED bar to fit "inbetween" the bull bar for a cleanest possible install.

    Can someone please measure the lenght of the Sport model front bumper LED bar, both the lenght of the housing and the c/c distance between the screw holes (preferably in millimeters)?

    This is the one I'm talking about:
    https://traxxas.com/products/parts/8088?t=overview

    Thanks!

  2. #2
    RC poster
    Join Date
    Aug 2019
    Location
    SW North Dakota
    Posts
    6
    Quote Originally Posted by Viking View Post
    Hi, guys and gals!

    I need a favour, please!
    I have an aftermarket front alu bumper with bull bar on my Defender, and I'm looking for a LED bar to fit "inbetween" the bull bar for a cleanest possible install.

    Can someone please measure the lenght of the Sport model front bumper LED bar, both the lenght of the housing and the c/c distance between the screw holes (preferably in millimeters)?

    This is the one I'm talking about:
    https://traxxas.com/products/parts/8088?t=overview

    Thanks!
    Did you ever find out, I would like to know also

  3. #3
    RC Qualifier
    Join Date
    Jul 2013
    Location
    Northern Norway
    Posts
    869
    No, but I'm still hoping someone will rise to the challenge...

  4. #4
    RC poster
    Join Date
    Aug 2019
    Location
    SW North Dakota
    Posts
    6
    I ordered one, when I get it I will post back with the dimensions.

  5. #5
    RC Racer
    Join Date
    Jan 2015
    Location
    Salado Tx
    Posts
    171
    Sorry, but I'm old skool SAE but if it helps; End to end measures 3 3/4 inches, screw hole distance is 3 1/2 inches and average height is 7/16 inches.

  6. #6
    RC poster
    Join Date
    Aug 2019
    Location
    SW North Dakota
    Posts
    6
    Quote Originally Posted by tankinfrank View Post
    Sorry, but I'm old skool SAE but if it helps; End to end measures 3 3/4 inches, screw hole distance is 3 1/2 inches and average height is 7/16 inches.
    Thanks for the reply!

  7. #7
    RC Qualifier
    Join Date
    Jul 2013
    Location
    Northern Norway
    Posts
    869
    Quote Originally Posted by tankinfrank View Post
    Sorry, but I'm old skool SAE but if it helps; End to end measures 3 3/4 inches, screw hole distance is 3 1/2 inches and average height is 7/16 inches.
    Great! Thank you very much.
    Metrically, that equals 95.3 and 88.9mm (height 11.1mm).

    But what about the length of the housing itself, without the screw tabs?
    Last edited by Viking; 09-12-2019 at 05:38 AM.

  8. #8
    RC poster
    Join Date
    Aug 2019
    Location
    SW North Dakota
    Posts
    6
    Quote Originally Posted by Viking View Post
    Great! Thank you very much.
    Metrically, that equals 95.3 and 88.9mm (height 11.1mm).

    But what about the length of the housing itself, without the screw tabs?
    78mm for the light bar it self
    12.5mm height of the light bar
    95mm total width
    89mm center to center on the mount holes

    I used my digital caliper to measure

  9. #9
    RC poster
    Join Date
    Aug 2019
    Location
    SW North Dakota
    Posts
    6
    Quote Originally Posted by Tommyjon View Post
    78mm for the light bar it self
    12.5mm height of the light bar
    95mm total width
    89mm center to center on the mount holes
    I used my digital caliper to measure

    I have a Injora Adjustable TRX4 90047 front bumper purchased on Amazon
    Forgot to add I moved the bottom bar up one set of holes to use those holes for the zip ties.

    I think it turned out pretty good.
    [IMG]20190913_135626 by Tommyjon, on Flickr[/IMG]
    20190913_124213 by Tommyjon, on Flickr
    20190913_124208 by Tommyjon, on Flickr
    20190913_124202 by Tommyjon, on Flickr
    20190913_124147 by Tommyjon, on Flickr
    Last edited by Tommyjon; 09-13-2019 at 09:16 PM.

  10. #10
    RC Qualifier
    Join Date
    Jul 2013
    Location
    Northern Norway
    Posts
    869
    Quote Originally Posted by Tommyjon View Post
    78mm for the light bar it self
    12.5mm height of the light bar
    95mm total width
    89mm center to center on the mount holes

    I used my digital caliper to measure
    Thanks a lot, Tommyjon.

    Funny thing is I installed exactly that bumper on my Defender three days ago!

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •