Results 1 to 2 of 2
  1. #1
    RC poster
    Join Date
    Mar 2015
    Posts
    1

    raise up the rear end

    I have slash 2wd with LCG chassis. The rear end dips down, so the front sits higher. I would like to raise up the rear end so that it sits up a little higher.

    Appreciate any ideas on what parts will be needed.

  2. #2
    RC Qualifier
    Join Date
    Aug 2015
    Posts
    457
    Use spacers on the shock springs or get stiffer spring, also if you shocks are more vertical will give you a little more height. If your rear bearing carriers have two holes for attachment to the lower arm use the upper hole.

    Sent from my VS996 using Tapatalk

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •