Results 1 to 23 of 23
  1. #1
    RC Qualifier
    Join Date
    Feb 2017
    Location
    UK
    Posts
    590

    General consensus on WideMaxx Kit?

    Picking up my MAXX soon - whats the general feeling about the Widemaxx kit?
    Does it really improve handling when turning a lot?

    Recommended to get the steel CVD kit alongside the wide kit too?
    https://www.youtube.com/iftibashir

  2. #2
    RC Qualifier
    Join Date
    Feb 2016
    Posts
    313
    Worth the 50 dollars best hop up so far. Also change the middle diff fluid to 100k, still wheelies

  3. #3
    RC Qualifier
    Join Date
    Feb 2017
    Location
    UK
    Posts
    590
    Are the steel CVDs a must with the wide kit?
    https://www.youtube.com/iftibashir

  4. #4
    RC Qualifier
    Join Date
    Feb 2016
    Posts
    313
    I don't have them but I don't beat on my rc's like some do

  5. #5
    RC Enthusiast
    Join Date
    Dec 2019
    Posts
    24
    > Are the steel CVDs a must with the wide kit?

    I tend to doubt that the wide kit changes the CVD analysis. In my opinion, the plastic drive shafts are a complete joke (esp at this price, which is a different issue). I had many failures of the plastic driveshafts on my not-wide-Maxx (4 separate breakages) and just went to the steel kit. I don’t know why mechanically the wide kit would change things one way or the other.

    > Picking up my MAXX soon - whats the general feeling about the Widemaxx kit?

    I’ll give you my opinion on this - which is just that - my opinion. If you want to go widemaxx, you should just get an erevo 2.0. For the same money, you get... the wide suspension arms, and (bonus!!) steel driveshafts. The car costs basically the same as the Maxx. Why buy the Maxx for the same money, then spend a whole bunch to turn it into an erevo.

    I have a Kraton 6S, which is really much wider than the Maxx. What makes the Maxx fun - I dare say the entire point of the Maxx, is that it is soooo squirrelly. You can easily get it up on two wheels.... two wheels on the same side that is. The stock Maxx will definitely want to roll over in a fast corner. My Maxx (not wide) rolls over on its side way more often than my Kraton 6S, which basically never gets rolled over.

    I don’t think it’s wrong to have a wide Maxx, its just more like the Kraton or erevo that way. But why spend the money to convert when you could just start off with the Kraton or erevo - and get metal drivetrain out of the box.

    The Kraton 6S is responsible. It’s fast and stable around corners, and follows the rules. The Maxx tho its easy to get it doing flips end over end, wheelies everywhere, up on one side or the other... its tearing around with its hair on fire in comparison. Anything that diminishes that I think reduces the point of getting the Maxx in the first place
    Last edited by dimsdale; 02-15-2020 at 07:32 PM.

  6. #6
    RC Enthusiast
    Join Date
    Jun 2015
    Posts
    27
    Quote Originally Posted by IftiBashir View Post
    Picking up my MAXX soon - whats the general feeling about the Widemaxx kit?
    Does it really improve handling when turning a lot?

    Recommended to get the steel CVD kit alongside the wide kit too?
    Wide kit is worth it imo. Bought the car for my 9 year old for christmas. He doesnít understand easy in the turns.

    If you run the truck moderately hard, you will be walking across the parking lot/ field quite a bit to turn it back over.

    Wide kit definitely reduces that and makes driving the truck a lot more fun.

    I havenít put in metal shafts the stockers have been working fine for both me and the kid. Until it becomes a problem I will leave it stock. No reason to replace good parts cause someone on a website says the stockers are bad.

    Or some guy telling you not to put on a wide body kit because then itís an erevo.......

  7. #7
    RC Qualifier
    Join Date
    Feb 2017
    Location
    UK
    Posts
    590
    Thanks for the advice guys.

    Im in the UK and will be purchasing the truck here.
    My brother has an E-Revo already and only lives down the road, and we typically take the trucks out together so I don't want another truck the same as his when we tend to swap about anyways\!

    I may just get the truck and the widemaxx kit first and see whether I need the CVDs later in that case. Ive read stories of others stock plastic CVDs failing with the widemaxx kit so was going to order the CVDs to avoid the 'downtime'! lol
    https://www.youtube.com/iftibashir

  8. #8
    RC Qualifier
    Join Date
    Nov 2018
    Location
    Livermore, CA
    Posts
    414
    Quote Originally Posted by dimsdale View Post
    > Picking up my MAXX soon - whats the general feeling about the Widemaxx kit?

    I’ll give you my opinion on this - which is just that - my opinion. If you want to go widemaxx, you should just get an erevo 2.0. For the same money, you get... the wide suspension arms, and (bonus!!) steel driveshafts. The car costs basically the same as the Maxx. Why buy the Maxx for the same money, then spend a whole bunch to turn it into an erevo.
    That’s a sensible way of looking at it. Buying a MAXX then spend half the cars price to get it to perform like a E Revo seems wasteful. Treat the MAXX for what it is, a stampede 4x4 and monster slash on steroids.

    By the time you upgrade the MAXX to the, uh, max, you might as well have started with some kit monster trucks with higher spec motor and servo set up.

  9. #9
    RC Competitor
    Join Date
    Apr 2011
    Posts
    98
    Quote Originally Posted by dimsdale View Post
    >
    I’ll give you my opinion on this - which is just that - my opinion. If you want to go widemaxx, you should just get an erevo 2.0. For the same money, you get... the wide suspension arms, and (bonus!!) steel driveshafts. The car costs basically the same as the Maxx. Why buy the Maxx for the same money, then spend a whole bunch to turn it into an erevo.
    IMO. the e-revo is inferior design compared to the Maxx. The 2.0 is just heavier and now more prone to breaking in the same places with the extra inertia.

  10. #10
    RC Racer
    Join Date
    Jan 2016
    Posts
    221
    I've got the maxx and 2 erevo 2.0's. They have both taken some serious hits and huge air. Neither one has broken yet. I almost picked up the widemaxx kit yesterday but my legs only had green and I have the red.

  11. #11
    RC poster
    Join Date
    Mar 2020
    Posts
    7
    Quote Originally Posted by IftiBashir View Post
    Picking up my MAXX soon - whats the general feeling about the Widemaxx kit?
    Does it really improve handling when turning a lot?
    buy maxx as is and bash it around till you get a hang for it. you might not need to go widemaxx instead could beef up some weak areas you find. that was my story.

  12. #12
    RC Enthusiast
    Join Date
    Nov 2019
    Posts
    45
    Quote Originally Posted by IftiBashir View Post
    Picking up my MAXX soon - whats the general feeling about the Widemaxx kit?
    Does it really improve handling when turning a lot?

    Recommended to get the steel CVD kit alongside the wide kit too?
    Yeah the steel CVDS are a must with the widemaxx. I broke my first plastic axle today. What I like about this truck overall is that it's a monster truck and it takes a beating. The plastic axle thing and how narrow it is and how overpriced it is, is what bothers me. I forget about all that once I'm bashing the crap out of it.

  13. #13
    RC Competitor
    Join Date
    Mar 2017
    Posts
    81
    Quote Originally Posted by Xmaxx 8s newb View Post
    Yeah the steel CVDS are a must with the widemaxx. I broke my first plastic axle today. What I like about this truck overall is that it's a monster truck and it takes a beating. The plastic axle thing and how narrow it is and how overpriced it is, is what bothers me. I forget about all that once I'm bashing the crap out of it.
    I did one pack through the max ,with the compleat wide kit and right beside it my son drove the Kraton 6s , the two vehicles are not compatible , don't get me wrong here been a Traxxas fan for years , that 6s is a land squid no dought bad part to the story is I didn't even make it through my pack , and the esc fan went out then the esc , rediculuose !! 6s for the win

  14. #14
    RC Competitor
    Join Date
    Oct 2011
    Location
    San Antonio, TX
    Posts
    56
    Just installed one side of the wide maxx kit and I can definitely tell that the steel axle shafts are going to be needed. I took a pic and you can see how much more exposed the stock shafts are creating a weak point where the shafts are exposed.


    Sent from my iPhone using Tapatalk

  15. #15
    RC Competitor
    Join Date
    Mar 2017
    Posts
    81
    Quote Originally Posted by nrvous1 View Post
    Just installed one side of the wide maxx kit and I can definitely tell that the steel axle shafts are going to be needed. I took a pic and you can see how much more exposed the stock shafts are creating a weak point where the shafts are exposed.


    Sent from my iPhone using Tapatalk
    Yes high velcity shafts are a must have

  16. #16
    RC Qualifier
    Join Date
    Oct 2015
    Posts
    968
    Quote Originally Posted by dimsdale View Post
    > Are the steel CVDs a must with the wide kit?

    I tend to doubt that the wide kit changes the CVD analysis. In my opinion, the plastic drive shafts are a complete joke (esp at this price, which is a different issue). I had many failures of the plastic driveshafts on my not-wide-Maxx (4 separate breakages) and just went to the steel kit. I don’t know why mechanically the wide kit would change things one way or the other.

    > Picking up my MAXX soon - whats the general feeling about the Widemaxx kit?

    I’ll give you my opinion on this - which is just that - my opinion. If you want to go widemaxx, you should just get an erevo 2.0. For the same money, you get... the wide suspension arms, and (bonus!!) steel driveshafts. The car costs basically the same as the Maxx. Why buy the Maxx for the same money, then spend a whole bunch to turn it into an erevo.

    I have a Kraton 6S, which is really much wider than the Maxx. What makes the Maxx fun - I dare say the entire point of the Maxx, is that it is soooo squirrelly. You can easily get it up on two wheels.... two wheels on the same side that is. The stock Maxx will definitely want to roll over in a fast corner. My Maxx (not wide) rolls over on its side way more often than my Kraton 6S, which basically never gets rolled over.

    I don’t think it’s wrong to have a wide Maxx, its just more like the Kraton or erevo that way. But why spend the money to convert when you could just start off with the Kraton or erevo - and get metal drivetrain out of the box.

    The Kraton 6S is responsible. It’s fast and stable around corners, and follows the rules. The Maxx tho its easy to get it doing flips end over end, wheelies everywhere, up on one side or the other... its tearing around with its hair on fire in comparison. Anything that diminishes that I think reduces the point of getting the Maxx in the first place
    Thanks for this post. Never thought about how widening it would basically make it like my E-Revo 2.0 minus the metal parts.
    Catch my videos at youtube.com/c/offworkhours

  17. #17
    RC Competitor
    Join Date
    Oct 2011
    Location
    San Antonio, TX
    Posts
    56
    Lol, well one pack in on a moderate bash session and the cvdís are on order.


    Sent from my iPhone using Tapatalk

  18. #18
    RC Qualifier
    Join Date
    Feb 2017
    Location
    UK
    Posts
    590
    Quote Originally Posted by nrvous1 View Post
    Lol, well one pack in on a moderate bash session and the cvdís are on order.


    Sent from my iPhone using Tapatalk
    wow!
    Was having second thoughts but glad I ordered the CVDs as well now!!
    https://www.youtube.com/iftibashir

  19. #19
    RC Qualifier
    Join Date
    Mar 2016
    Posts
    967
    Nice Twisted Traxxas

    Rubbery
    fabricator

  20. #20
    RC Competitor
    Join Date
    Oct 2011
    Location
    San Antonio, TX
    Posts
    56
    I decided to go back to the stock setup. My lhs carries a ton of maxx parts and realized if I have to replace a broken wide maxx arm; they will not break up a set of arms just to replace one. So, Iíd rather be able to replace one stock arm for a few bucks rather than buy an entire new wide maxx kit. I also picked up a couple of spare stock axels since they carry those as well.


    Sent from my iPhone using Tapatalk

  21. #21
    RC Qualifier
    Join Date
    Mar 2011
    Posts
    464

    General consensus on WideMaxx Kit?

    Replacement wide Maxx arms are available in sets of two. Parts 8998 and 8999.

    https://traxxas.com/search?keyword=Wide+Maxx
    Last edited by boosta; 03-09-2020 at 05:57 PM. Reason: Link

  22. #22
    RC Competitor
    Join Date
    Oct 2011
    Location
    San Antonio, TX
    Posts
    56
    Quote Originally Posted by boosta View Post
    Replacement wide Maxx arms are available in sets of two. Parts 8998 and 8999.

    https://traxxas.com/search?keyword=Wide+Maxx
    Awesome! Thanks for the link!


    Sent from my iPhone using Tapatalk

  23. #23
    RC Competitor
    Join Date
    Mar 2017
    Posts
    81
    Quote Originally Posted by nrvous1 View Post
    Awesome! Thanks for the link!


    Sent from my iPhone using Tapatalk
    Allrightythen ,, the wide max kit is finnaly compleat !!! Sledgehammer tires put the max where it needs to be , they make it flip , and holds traction a ton better , also those tires go on my rustler vxl ,and my slash ultimate , they make all cars alotore fun for sure. But of course as soon as there available there out of stock !! What is going on here Lewis ?
    Last edited by Double G; 03-17-2020 at 07:26 AM. Reason: language

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •