Results 1 to 2 of 2
  1. #1
    RC poster
    Join Date
    Aug 2013

    larger slipper bearing

    I melted my spur gear yesterday and baked the small bearing on the shaft as well. I am going to upgrade to the Revo slipper now. I was looking at parts and saw this -part #6893G. It replaces the bearing on the shaft. Outside of the larger diameter creating less heat, what is the point of this? And is it worth it?

    Thanks in advance.

  2. #2
    RC Qualifier
    Join Date
    Jul 2013
    Northern Norway
    That's the bearing adapter. It replaces the stock plastic adapter and is a "must have" item. It does not, however, replace the bearing itself.
    Optional, you can get an aluminium motor mount with a 10x19x5mm bearing instead of the stock 10x15x4mm bearing. This is also a highly recommended upgrade:;c=805

    You can also get them for the HCG chassis:;c=480

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts