What’s the best way to weigh the front down?

[XmaxxBasher1200]

I’ve tuned my xo-1 so much, that I’m worried that it will go airborne when full speed ( it goes way faster than 100mph... ALOT faster) . So what would be the best way to prevent that so I can open it up fully at the track?

[gusd2]

My first suggestion, is check the direction of the wind and never speed run against it. Always with the wind if possible.

Otherwise, the bumper has a large surface area, for lead weights or other options. Trial and error to figure out how much you need given how much rake you have in the front.

[XmaxxBasher1200]

My first suggestion, is check the direction of the wind and never speed run against it. Always with the wind if possible.

Otherwise, the bumper has a large surface area, for lead weights or other options. Trial and error to figure out how much you need given how much rake you have in the front.

Good advise!

[TwoBelugas]

You can always hollow out the foam bumper pad and put weight in there, the plastic pieces can hold some weight I imagine.

[XmaxxBasher1200]

You can always hollow out the foam bumper pad and put weight in there, the plastic pieces can hold some weight I imagine.

That could work

[kzsteve]

be sure to take the wings off

[XmaxxBasher1200]

be sure to take the wings off

What Wings?

[ReglarGuy]

What I do is I use 6400mah batteries. I get more time, and it keeps my XO-1 nicely planted.