Results 1 to 32 of 32
  1. #1
    RC Competitor
    Join Date
    Jun 2020
    Posts
    95

    My Telluride 4x4 sport

    Hi, in 2014 i bought my first Traxxas, a Stampede 4x4 vxl. inspired by the Jang, and others, it has bin in many shapes. Tried to make a Crawler whit Slash 4x4 HCG and Stampede 4x4 chassi.
    I found that the Slash chassi is a bit long, and the Stampede/Telluride chassi too short.

    So i bought a used Telluride this year to do my 3. atempt on building a Trail/crawler car.

    Setup:
    Custum homemade Stampede 4x4 Chassi, stretched to new Wheelbase 312 mm.
    Telluride bulkheadz, A-Arms and the rest of steering components.
    Locked servo saver.
    Slash 4x4 HCG battery hold down.
    Shortened slash 4x4 center drive shaft.
    100 % locked diffs whit glue.
    Slash 4x4 wheels whit 2.2 crawler tires 126 mm OD, i cut inside bed to fit over the 3 inch inside of wheel.
    Ultra shocks that i tricked out on the length, 20 wt oil.

    Electronics:
    Power HD 20 kg servo.
    Hobbywing 1080 esc
    Axial 27 T motor.
    3:1 Gear ruduction unit
    Stampede 4x4 slipper clutch, 54 T spur.
    3S lipo.

    Body:
    I had a Jeep Comanche 313 mm body layng around that i have used in the start. but i have ordered a Traxxas Trx 4 sport body for it.

    I will make some bumpers when i get the sport body mounted.

    I think the car do very good on rocks and hard terrain, its not 100 % finish, but works good, have over 20 battery packs on it so far.
    I will post some pictures.

    Sorry for my English, im from Scandinavia.

  2. #2
    RC Competitor
    Join Date
    Jun 2020
    Posts
    95
    Some pics.

    Sent fra min SM-G390F via Tapatalk

  3. #3
    RC Competitor
    Join Date
    Jun 2020
    Posts
    95
    Action, this body will by switshed wiht Trx4 sport body.

    Sent fra min SM-G390F via Tapatalk

  4. #4
    RC poster
    Join Date
    Jun 2020
    Posts
    6
    holy! that looks amazing. roughly how much money do you think you put into that beast?

  5. #5
    RC Competitor
    Join Date
    Jun 2020
    Posts
    95
    Quote Originally Posted by snowyy View Post
    holy! that looks amazing. roughly how much money do you think you put into that beast?
    Thanks, i think it will look better with Trx4 sport body. Hmm i got the car cheap. with all parts and all maybe about 450 US Dollar.

    I would say that it is kind of a budget build, mostly stock Traxxas plastic, some home made steel plates for chassi. And budget friendly elektronics.

  6. #6
    RC Champion
    Join Date
    Apr 2015
    Posts
    1,036
    SUBSCRIBED! I dig this truck! I've always liked the Telluride. I like how you stretched out the wheelbase, that will definitely improve the stability. Great job on the build. The TRX 4 sport Body is one of my favorite crawler bodies. About five years ago a friend of mine had a Telluride and that thing climbed like a goat.

    Sent from my LM-G710VM using Tapatalk

  7. #7
    RC Champion
    Join Date
    Apr 2015
    Posts
    1,036
    Do you have any side shot pics of the truck ?

    Sent from my LM-G710VM using Tapatalk

  8. #8
    RC Competitor
    Join Date
    Jun 2020
    Posts
    95
    Quote Originally Posted by MaXDee View Post
    SUBSCRIBED! I dig this truck! I've always liked the Telluride. I like how you stretched out the wheelbase, that will definitely improve the stability. Great job on the build. The TRX 4 sport Body is one of my favorite crawler bodies. About five years ago a friend of mine had a Telluride and that thing climbed like a goat.

    Sent from my LM-G710VM using Tapatalk
    Hi, yes i love this 4x4 chassis myself, and they can do pretty good in terrain.
    The longer wheelbase helpt out alot, no i can climb much steeper terrain without folling backwords.
    Yeah the Trx4 sport body do look good, and like all the scale optonial parts for it.

  9. #9
    RC Competitor
    Join Date
    Jun 2020
    Posts
    95
    Picture from the side, this body dont cover the chassi at all. Hope it will be better with Trx4 sport body.

    Sent fra min SM-G390F via Tapatalk

  10. #10
    RC Champion
    Join Date
    Apr 2015
    Posts
    1,036
    Quote Originally Posted by TWG2000 View Post
    Picture from the side, this body dont cover the chassi at all. Hope it will be better with Trx4 sport body.

    Sent fra min SM-G390F via Tapatalk
    Cool! Thanks. Good looking truck. I prefer pickup truck bodies to SUVs.

    Sent from my LM-G710VM using Tapatalk

  11. #11
    RC Competitor
    Join Date
    Jun 2020
    Posts
    95
    Yes, i also like pickup trucks better, my Trx4 sport body came today. I have painted it Tamiya white. Pictures are comming tomorow.

  12. #12
    RC Competitor
    Join Date
    Jun 2020
    Posts
    95
    First look with the sport body.

    Sent fra min SM-G390F via Tapatalk

  13. #13
    RC Competitor
    Join Date
    Jun 2020
    Posts
    95
    I think it fitted good this body, still not cover the chassi completely, but much better.

    Sent fra min SM-G390F via Tapatalk

  14. #14
    RC Champion
    Join Date
    Apr 2015
    Posts
    1,036
    Man that body looks great! So much better than the other one.

    Sent from my LM-G710VM using Tapatalk

  15. #15
    RC Qualifier
    Join Date
    Nov 2018
    Location
    Livermore, CA
    Posts
    643
    Quote Originally Posted by MaXDee View Post
    Man that body looks great! So much better than the other one.

    Sent from my LM-G710VM using Tapatalk
    Agreed. Thatís one sharp looking rig!

  16. #16
    RC Competitor
    Join Date
    Jun 2020
    Posts
    95
    Thank you, so i made a rear bumper, using parts from a stampede and slash 4x4.
    Next will be to make a front bumper.

    Sent fra min SM-G390F via Tapatalk

  17. #17
    RC Competitor
    Join Date
    Jun 2020
    Posts
    95
    Driving on rocks.

    Sent fra min SM-G390F via Tapatalk

  18. #18
    RC Champion
    Join Date
    Apr 2015
    Posts
    1,036
    So how well does a crawl on the Rocks you or at? Does it tip over easily, or is it pretty planted?

    Sent from my LM-G710VM using Tapatalk

  19. #19
    RC Competitor
    Join Date
    Jun 2020
    Posts
    95
    Quote Originally Posted by MaXDee View Post
    So how well does a crawl on the Rocks you or at? Does it tip over easily, or is it pretty planted?

    Sent from my LM-G710VM using Tapatalk
    I think it crawl pretty good on the rocks, i have no solid axel truck to compered with, but i can go almost anywhere. It can get stuck on sharp rocks on the A-arms some times.

    On rocks the low gear ratio, locked diffs and crawler tires realy help i guess.
    With the new wheelbase 312 mm and a track width of 275 mm its very planted and do not tip over so much. I think 275 mm is wider then most trail trucks?

  20. #20
    RC Competitor
    Join Date
    Jun 2020
    Posts
    95
    Made a front bumper, using some old slash 4x4 parts. Not super happy about the look, but it will work for now.

    I will try to make a running video some day.

    Sent fra min SM-G390F via Tapatalk

  21. #21
    RC Champion
    Join Date
    Apr 2015
    Posts
    1,036
    Looks good. Reminds me of the front of a Ford Raptor.

    Sent from my LM-G710VM using Tapatalk

  22. #22
    RC Competitor
    Join Date
    Jun 2020
    Posts
    95
    MaXDee: yes not to far of.
    I bought a spare cheap servo from ebay, KS 3518
    https://www.ebay.com/itm/Full-Metal-...EAAOSwhMFXlG-v

  23. #23
    RC Competitor
    Join Date
    Jun 2020
    Posts
    95
    Mounted the servo the other day, so far i like it better then the Power hd 20 kg.

    Sent fra min SM-G390F via Tapatalk

  24. #24
    RC Champion
    Join Date
    Apr 2015
    Posts
    1,036
    Quote Originally Posted by TWG2000 View Post
    Made a front bumper, using some old slash 4x4 parts. Not super happy about the look, but it will work for now.

    I will try to make a running video some day.

    Sent fra min SM-G390F via Tapatalk
    If you're into tinkering, you could put LED lights in the round holes of the bumper.

    Sent from my LM-G710VM using Tapatalk

  25. #25
    RC Competitor
    Join Date
    Jun 2020
    Posts
    95
    Quote Originally Posted by MaXDee View Post
    If you're into tinkering, you could put LED lights in the round holes of the bumper.

    Sent from my LM-G710VM using Tapatalk
    I might do that one day

  26. #26
    RC Competitor
    Join Date
    Jun 2020
    Posts
    95
    Trailing in forest.

    Sent fra min SM-G390F via Tapatalk

  27. #27
    RC Competitor
    Join Date
    Jun 2020
    Posts
    95
    Made my first ever rc video. It was extremely hard to film and drive with only 1 hand I could not get the feeling on the throttle, but here is a video for you:

    https://www.youtube.com/watch?v=RJPAQznjZjY

  28. #28
    RC Champion
    Join Date
    Apr 2015
    Posts
    1,036
    Great first video! That thing crawls as good as my TRX 4 sport.

    Sent from my LM-G710VM using Tapatalk

  29. #29
    RC Champion
    Join Date
    Apr 2015
    Posts
    1,036
    What Crawler tires are you using?

    Sent from my LM-G710VM using Tapatalk

  30. #30
    RC Competitor
    Join Date
    Jun 2020
    Posts
    95
    Quote Originally Posted by MaXDee View Post
    What Crawler tires are you using?

    Sent from my LM-G710VM using Tapatalk
    I bought these tires on ebay, but I can not remember what brand and model they are.
    They are 2.2 tires, 125mm OD. I have not testet so many crawler tires, but I like these alot. Very grippy.
    Last edited by TWG2000; 07-13-2020 at 10:30 AM.

  31. #31
    RC Competitor
    Join Date
    Jun 2020
    Posts
    95

  32. #32
    RC Competitor
    Join Date
    Jun 2020
    Posts
    95
    Picture of the wheel from the inside.

    Did some tuning on my HW 1080. This program card comes in the box with esc. Easy to use.

    Sent fra min SM-G390F via Tapatalk

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •