was going on guys hope everyone is well quick question how can I determine if my servo went bad
Sent from my iPhone using Tapatalk
C.I. RC
What issues are you seeing?
Well wheels will not turn... If it is the gears stripped you will hear the servo spinning like crazy non stop
Sent from my Pixel 3 XL using Tapatalk
I not really hearing anything just doesn’t seem as responsive as it was on my first run
Sent from my iPhone using Tapatalk
C.I. RC
Try turning tsm off for a min and see if fixes it and if have link app make sure steering sensitivity is 100%
Sent from my Pixel 3 XL using Tapatalk
Hey guys hope all is well so I noticed today while I was out the when And the revo is sitting still the tires turn by them selfs to one side any ideas why this is happing ???
Sent from my iPhone using Tapatalk
C.I. RC
Perhaps tsm causing issues.?
Sent from my Pixel 3 XL using Tapatalk
How can I fix the problem
Sent from my iPhone using Tapatalk
C.I. RC
Per Traxxas instructions, do not adjust steering trim with tsm on. Make sure tsm is completely off before making steering trim adjustments. Also, I've noticed that tsm can kinda slow the steering action down and it has a dead spot (chronicled in my very first run with the erevo 2.0). Bottom line, if the servo is still responding to inputs, its a software issue and not a hardware issue. Happy hunting, and remember, keep having fun!
it's alright son, I'll fix it
Its alright son I'll fix it when you break it
Turn off tsm.
I don't remember if you changed servo... Or moved servo horn.
If you have link app. Turn off tsm in drive effects and make sure tsm knob on tx is all the way left. Make sure steering trim is centered.
Make sure steering sensitivity is 100%. On link app
Then check your end points.
If at any time you adjusted end points with tsm on you may of killed servo.
I would then see if servo horn needed aligned on the servo.
Sent from my Pixel 3 XL using Tapatalk
Not to hijack this thread, but, I just installed my savox 1212sw servo. And I've never heard of setting endpoints before. How do I do that, and is it necessary with every servo? Or just certain ones?
If you have the bluetooth module and the Traxxas app super easy to do in your settings. I highly recommend it on all servos when installed and set up. It prevents the servo from trying to drive past the mechanical end of your steering. Thus it will extend the life of your servo. Ill look and see if you can do it without the app and let you know...hold plz...
Ok checked and you can for sure do it without the app. Google the manual for the transmitter you have and there is a sequence to follow to do it, last page. In my opinion...just get the bluetooth and the app...way easier and you can always update your trucks software too!
Last edited by RICK DIZZLE; 07-28-2020 at 12:40 AM.
Lol gee whiz features...love it!