Results 1 to 4 of 4
  1. #1
    RC poster
    Join Date
    Oct 2020
    Posts
    2

    tmaxx 3.3 foc stuck in reverse

    i have a tmaxx 3.3 that i acquired used for very cheap and ive been all through the truck, it seems as though it has a forward only trans, and yet its only engaging the drive-line in reverse. ive even swapped the front dif to the rear to see if that would make a difference with no change does anyone have any ideas? what way should the trans be spinning? right now i think its engaging clockwise . ive had the tranny apart and the oneway bearing looks good and same withe the pin that is known to shear off, im at a total lost.

  2. #2
    RC poster
    Join Date
    Oct 2020
    Posts
    2
    i fliped the diffs over so im gonna test it tommorw and see if that was the issue hoping for the best

  3. #3
    RC Champion
    Join Date
    Mar 2016
    Posts
    1,345
    Should be good to go now
    Been there done that
    fabricator

  4. #4
    Marshal Double G's Avatar
    Join Date
    May 2008
    Posts
    14,229
    Flip the diffs. If I recall the screws should be on the right as you look at them.
    The Super Derecho

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •