Results 1 to 5 of 5
  1. #1
    RC poster
    Join Date
    Jan 2021
    Posts
    1

    Revo 3.3 problem start but

    Hi guys,

    I have a problems with my revo... When I start with the glow plug.. is ok but if I remove the glow plug ignitor .. the revo stop running.

    And if I start the revo on stunt .. when it start the wheel run very very fast but the remote is off..

  2. #2
    RC poster
    Join Date
    Feb 2019
    Posts
    12
    I don't have a immediate answer to your start problem. But never start your truck without the radio/transmitter on.

    Sent from my SM-N975U using Tapatalk

  3. #3
    Marshal Double G's Avatar
    Join Date
    May 2008
    Posts
    14,301
    Replace the glow plug. An engine that stalls when the ignitor is removed is a symptom of a bad plug.

    Replace the clutch. Or the idle is too high.
    The Super Derecho

  4. #4
    RC poster
    Join Date
    Feb 2021
    Posts
    1
    hi

    I had the same problem with my Traxxas 3.3 Revo. No matter what I did it would not idle or run although it did until you put the brakes on.

    I have made a YouTube video that fixed my Revo nitro engine 3.3.

    https://youtu.be/31GWABPSoHQ

    Hope it helps.
    Last edited by Double G; 02-05-2021 at 10:19 AM.

  5. #5
    RC Champion grizzly03's Avatar
    Join Date
    Dec 2014
    Location
    Adirondacks
    Posts
    2,616
    Quote Originally Posted by RemoT View Post
    hi

    I had the same problem with my Traxxas 3.3 Revo. No matter what I did it would not idle or run although it did until you put the brakes on.

    I have made a YouTube video that fixed my Revo nitro engine 3.3.

    https://youtu.be/31GWABPSoHQ

    Hope it helps.
    If you need to open your throttle that much to keep the engine running, you got a problem. Especially if you need to modify the carb in order to open the throttle barrel up more than the idle screw will allow.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •