no direction e revo 2.0

[alain lovis]

Hello,
sorry for my english, i live in switzerland and speak french.

here is my problem: I have no direction when all is green on my e revo 2.0
the problem appeared during a session

I said to myself that it was the servo (common problem) but its replacement has not changed anything.
when I calibrate the direction stops, it works but when I finish programming it no longer works (see video)



I tried to reset the default parameters of the tqi to zero (press menu + set / turn on transmitter / release menu + set / press set) without result
I tried to change the tqi 6533 and calibrate, also without results .

thanking you in advance for your help

alain

[alain lovis]

I forgot to specify that for the video I did not validate the stops by pressing set
by performing the procedure on the right set / on the left set / in the center set and long menu to exit its change nothing

[omen]

It almost sounds like your multi function knob has been set for steering percentage, and then turned all the way down to 0.

[alain lovis]

I set the direction stops with the tsm on zero.

https://www.youtube.com/watch?v=nQWYlGeETiM

even the steering trim works

https://www.youtube.com/watch?v=w8zGAv6uI_A

but still no direction

am I doing something wrong?

[omen]

The knob you turned to set tsm to zero may not be controlling tsm. Just for fun, turn it up to max and try again.

[alain lovis]

unfortunately its does not change anything with the tsm to the max or the middle. I also tried to calibrate the direction with the tsm to the max, still no direction.

to put everything in factory setting there is something else to do than: press menu + set / turn on transmitter / release menu + set / press set ?

thank you for your help

[grizzly03]

Do you have or use the BT Link module? If you do, use that or make sure it is off when manually setting points.

After you reset the transmitter and before you go and try to set end points, does the steering work?

[alain lovis]

not BT link.
after 20 reset and recalibration attempts, the 21st one worked.

thank you all

alain

[grizzly03]

...after 20 reset and recalibration attempts, the 21st one worked

Could have been worse and taken 22 tries, LoL!!!

In all seriousness. Sorry for the hassle it gave you. Glad it's working now.