Results 1 to 3 of 3
  1. #1
    RC poster
    Join Date
    Apr 2021
    Posts
    1

    week old Teton Steering works, Throttle does not

    got the family a set of tetons. upgraded drive shafts on mine and running lipos and nimh.
    Goes from working then not. Steering works but throttle does not. I even rebound the transmitter, and still nothing. it showed a positive binding. I am at a complete loss.

    light just flashes as I press on the throttle. What is going on!?

    Any help would be greatly appreciated!

  2. #2
    RC Champion grizzly03's Avatar
    Join Date
    Dec 2014
    Location
    Adirondacks
    Posts
    2,861
    Make sure your not in LiPo mode (low voltage protection) and using a NiMh battery.

    What color are the LEDs and what flashing are they doing? Need a little more info.

    Page 15 of the manual gives the ESC codes and the meanings:https://latrax.com/sites/default/fil...ual-EN-R03.pdf

  3. #3
    RC Qualifier
    Join Date
    Apr 2017
    Location
    Illinois
    Posts
    363
    The stock motor is probably burnt out. If not that, the esc may be plugged into the wrong slot on the reciever.
    Doesn't need to be fancy. Just needs to run.

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •