Results 1 to 3 of 3
  1. #1
    RC poster
    Join Date
    May 2021
    Posts
    1

    Wires wont Solder

    I recently purchased a used 1/16 slash and when I went to use it one battery wire had come off the plug.

    No big deal I figure, I have soldered stuff before (been 10ish years though....)

    Long story short, I strip back some insulation and attempt to get some solder into the wires and just nothing. The wire is getting hot and I have to stop since I can feel it through the insulation but no solder is being picked up.

    Any tips/simple things I am missing?

  2. #2
    RC Turnbuckle Jr.
    Join Date
    Oct 2016
    Posts
    4,976
    Try adding flux prior to soldering. Traxxas uses odd wire. In my opinion, seems like the strands are thicker and stiffer(Twss)


    Sent from my iPhone using Tapatalk

  3. #3
    RC Qualifier
    Join Date
    Oct 2018
    Posts
    432
    And the biggest tip you've got. And don't buy those cheap hollow core tips, they lose their heat too fast.

    Sent from my SM-G970U using Tapatalk

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •